How does the high speed toothbrush bristler protect the brush machine

(1) the operator should frequently add lubricating oil to the moving parts of the shaper to reduce mechanical wear.

(2) timely check whether the screw is loose and lock it in time.

(3) adhere to the cleaning of guide rail and screw, avoid debris adhesion to guide rail or screw, affecting the accuracy of positioning.

(4) ensure that the electrical box works in a ventilated environment, avoid damp or high temperature environment, and avoid violent vibration of the electrical box.

(5) the electrical box cannot be operated in the environment of strong electromagnetic field, or it may appear uncontrolled.

(6) the wiring of input power should be correct (red, blue and yellow wires are respectively connected to 380V three-phase wire, green wire is connected to zero wire, and yellow and green wire is connected to ground wire). Pin Numbers: 1, 2 and 3 are 380V phase wire, 4 zero wire and 5 ground wire. The operating voltage should be stable, insist on AC380±10V, too high voltage may cause the electronic components to burn.

(7) it is forbidden to hit the touch screen with a hard object, otherwise the sensitivity will be decreased or even the glass screen will be broken.

(8) do not pull the cable too hard.

Yangzhou engel automation equipment co., LTD. The main products are: toothbrush flocking machine, toothbrush high-speed flocking machine, high-speed toothbrush flocking machine, automatic toothbrush bronzing machine

Our website is www.yzsmsy.com